Temperature testing machine BE-8401

leakcomputer-controlledPLC-controlled

Thermal runaway test machine test the whole vehicle or the complete vehicle-borne ion battery system or the subsystem of vehicle-borne lithium-ion battery system, including a lithium ion battery and an electrically connected lithium ion battery. The applicable standard is UL 2580, IEC 62619. Relevant standards requirement: 1. Test objects: The test object is the whole vehicle or the complete vehicle-borne ion battery system or the subsystem of vehicle-borne lithium-ion battery system, including a lithium ion battery and an electrically connected lithium ion battery. 2. Test conditionsThe test shall be started under the following conditions. • Testing should be started at temperature higher than 0 ℃, relative humidity 15%~90%, and the atmospheric pressure 86~106 kpa. • Before testing, The SOC of the test object should be adjusted to 90% or 95% of the normal SOC working range specified by the manufacturer. • Before testing, all the test device must be running normally. • The test objects should be modified as little as possible when testing, and the manufacturer should submit a list for all changes. • Testing should be at the room temperature or wind speed is not more than 2.5 km/h. 3. Thermal runaway trigger object Heating and needling are recommended as candidates for thermal runaway test of lithium ion battery systems. Manufacturers can choose one of them. Technical Parameters: Trigger Mode: Overcharging and heating (Optional) Heating Mode Channel: 2 channel(1 in common used, 1 for spare) Max. Heating Power: 3KW, Single channel Power Adjust Mode: Changed the heating tube with different capacity + Adjust the input current.