Foam fire nozzle Varsha-30

• Fixed flow gallonage heavy duty nozzle for use with monitors • Easy pattern change under flowing condition from straight stream to wide fog • Field replaceable spinning teeth ring • Excellent water stream used as water nozzle or non-aspirating foam nozzle • Flow set at 6.9 bar (100 psi) can be changed from 5.6 to 12 bar (80 to 175 psi), if required • 2.5" BSP swivel female inlet base • Hard anodized Aluminium or corrosion resistant Bronze material VARSHA-30, is fixed gallonage master stream nozzle, designed for heavy-duty use on fixed monitors. The nozzle is factory set for required flow between 400 to 600 GPM. The flow can be changed in the field by replacing plunger or addition of spacer. The flow pattern is easily changeable under flowing condition. Superior fog pattern with field changeable spinning teeth. Excellent for AFFF application when used with premixed water-foam solution. The nozzle is available with three different materials, hard coat anodized Aluminium or Bronze or Stainless Steel all with SS internals. The performance data shown in this catalogue is effective stream trajectory in stand still air condition. The maximum overall reach of last water drop is approximately 3-5% more than the effective stream performance data given. The effective stream decreases by about 10% when used as foam nozzle with premixed water foam solution. The jet stream may get effected considerably with tail or head wind. MAINTENANCE The nozzle must be inspected regularly for possible damage or dirt around the moving parts.