Foam fire nozzle Varsha - HF50

•Hard anodized aluminium or bronze material •Combination of fog and straight stream without shut off •Spinning teeth ring for full fog pattern •4.0 inch BSP female swivel inlet •Factory set for single fixed flow between 3030 to 4750 LPM (800 to 1250 GPM) •Used as water cum foam nozzle, self-inducting and non-aspirating •Nozzle provided with clear PVC 3 mtrs. long suction hose with one end stainless steel dip tube APPLICATION VARSHA HF50 – Hydro Foam Nozzles have been designed for wide flow range from 3030 to 4750 LPM (800 to 1250 US GPM) for use with Monitors. These are fixed flow nozzles, simple and rugged with superior stream and reach. The straight stream from maximum reach can be easily changed to wide fog pattern under flow condition by rotation of the pattern adjustment sleeve. The nozzle is provided with spinning teeth. The nozzle is made out of hard coat anodized Aluminium, Bronze or Stainless Steel with SS internals. It is a self inducting nozzle equipped with a foam concentrate pick up tube of 3.0 meters long with a swivel connection. The nozzle can be used as a water nozzle and when foam supply is established, it acts as a self inducting Foam Nozzle. The performance data shows effective stream trajectory in stand still air condition. The maximum overall reach of last drop is approximately 3-5% more than the effective stream performance data. The jet stream may get effected considerably with tail or head wind.