Rockwell hardness tester

floor-mountedfor large componentsmotorized

The hardness testing systems are automated and/or integrated into the production process, with and without component feed. Hardness tests on components with complicated geometries or tests in the running production can sometimes not be covered with standard hardness testers. In these cases the company Hegewald & Peschke GmbH offers you the complete engineering know-how for the realization of the testing task. Our already produced hardness testing systems include: Hardness testing stations for crankshafts, automatic rim hardness testing systems, hot hardness testing systems, circular blank testing systems and portal hardness testing systems. Portal hardness testing device with ball caster table Rockwell hardness testing at large and heavy elements The testing portal is used for the hardness testing based on the Rockwell method HRC according to DIN EN ISO 6508 at large and heavy elements. The machine frame is built as a portal with a clear width of 1360mm and a clear height of 1000mm above the ball caster table, so that components up to a maximum width of about 1200mm and a maximum height of about 900mm can be crossed and tested. The minimal height of the specimen is 100mm. The preparation of the testing point has to be carried out beforehand. The search unit is positioned manually at the desired point of measurement. After that the measurements can be executed with a hand lever. The fixed lower frame of the construction is used as ball caster table for the specimens und carries the rails for the lengthwise displaceable portal. The machine itself consists of a solid portal that ranges in a guiding system.