Machine tool chamfering tool DEFA series

The DEFA range consists of three tool series, each covering a certain bore diameter range. The chamfering capacity is variable and infinitely adjustable directly on the tool, ranging from 0.1 to 2.0 mm, depending on the bore diameter. defa-faswerkzeug-sortiment Range The DEFA range consists of three tool series, each covering a certain bore diameter range. The chamfering capacity is variable and infinitely adjustable directly on the tool, Should no standard tool solution be available for your application, HEULE can make a detailed application analysis. The result will be an application-specific solution. More about custom developments Construction The DEFA chamfering tool is characterised by two interchangeable carbide blades with a unique cutting edge geometry. The two chamfering blades are activated by a spring-loaded blade control. This pressure and the resulting blade force can be adjusted according to the workpiece material. The rigid connection between the two chamfering blades allows the processing of bores with longitudinal grooves or crossbores. By turning the adjusting screw, the chamfer diameter can be adjusted. Process steps description DEFA removes the burr from the front and back bore edges and produces chamfers of the correct diameter without rotating the workpiece or stopping the spindle. First, the blades remove the burr on the front edge of the bore. An inclined, non-cutting control surface on the blades controls the cutting of the chamfer and the retraction of the blades into the tool body as soon as both blades touch the workpiece surface. The DEFA tool can then pass through the bore in rapid feed. Due to the blade’s crowned surface,