Mechanical press PE-6 sreries

punchingdeep drawingcutting

The PE series mechanical presses are suitable for a wide variety of applications to industries that perform punching, stamping, cutting and deep drawing works. They are made of S355JR steel, stabilized, and mechanized at the end of the welding process to ensure a perfect parallelism and precision. Calculated and designed with finite element software. With all this, we always guarantee our high standards of precision and quality. The rod is built of high-strength forged steel and high-performance alloy bushings. To guarantee perfect maintenance and operation, all our range is equipped with centralized automatic lubrication with a programmable progressive system. The transmission between the motor shaft and the eccentric shaft is by means of a gearbox with ground gears, this system allows us to work with a high tonnage at relatively low nominal speeds. The slide is made of welded and stabilized steel with 6 ground prismatic guides. It incorporates a base for the recovery of the excess oil from the lubrication. OVERLOAD AND COMPENSATION An overload protection unit is installed to protect machine components and installed tools. A safety valve discharges the oil from the chamber when for any reason the reached set value is higher than the nominal load. For an effective balance of the slide and the dies, the compensation is by means of two pneumatic cylinders. PNEUMATIC CLUTCH & BRAKE COMBINATION The clutch-brake is electropneumatic, equipped with a double safety body solenoid valve and crossflow. The pneumatic system includes a compensation tank, a regulator-lubricator filter, a control pressure switch, and a safety valve.