Plunger pump MP10-20

lubricating oilmanualstationary

Screw-in cartridge and push type manual pump with two built-in check valves. Operation Change the sealed volume of the cylinder chamber by pressing or lifting the handle and implement the suction and discharge through the built-in check valves. Refer to the performance chart for handle torque characteristics. Please note that the effect from the internal high pressure will deposit a thin layer of oil on the plunger. The oil layer will lubricate the plunger seals, thereby reducing friction and extending the serving life of the seals. Feature Anti-loosening spring pin applied. ZnNi/Cn/To 8μ plating and hard anodization. Salt spray test 720 hours. Optional for stainless steel handle (600mm length) with rubber sheath. 360 degree rotatable handle. General industrial cavity. Proof pressure：500 bar（7250 psi） Displacement：9ml/stroke Leakage：5 drops/min Suction Pressure：194 mm Hg （7.6 in.Hg, 104 in. H20) , less than atmosphere pressure Corrosivity grade：C4H Fluilds：Mineral oil or synthtic lubricating oil with the viscosity ranging from 7.4 to 420cSt (50-2000ssu) Installation：Vertically screw in Cavity：VC10-2 Cavity tool：T/H10-2RC-T-G（Rough），T/H10-2FM-T-G（Finishing） Handle：600mm tube，rubber handle：0.99kg（2.18lbs）