Temperature rise detector EACD-1

vibrationopticalelectronic

The EACD-1 is an optically isolated AC frequency detector intended for use as a feedback with HydraForce electronic controllers used in hydraulic motor-driven AC power generator applications. The output of the EACD-1 provides a frequency pulse signal based on the generator speed to directly drive the frequency input pin of the controller operating in closed loop mode. Operation The AC output voltage from the power generator provides the input signal and is connected to pins 1 and 2. Pin 3 connects to the electronic controller signal ground. Pin 4 connects to the electronic controller signal input. The input type of the electronic controller is set to frequency pull-up. A portion of each positive half of the AC input will cause the output pins 3 and 4 to conduct and produce a logic low pulse. Notes You may connect pin 4 to positive voltage and take the output signal at pin 3 to provide a logic high pulse each cycle. If using this mode, take extra care not to exceed the voltage and current limits of the device. Add a 100 mA fuse to each input pin (J1-1,2) for added protection. Features Optical isolation provides protection of DC electronics from the AC power source Tested for severe environmental conditions - temperature, vibration, and voltage transients. Cost-effective way to monitor AC power frequency for generator control applications