Sieve ZS

Structure Vibrating screen uses upright motor as the source of vibration, and it is equipped eccentricity hammer on the both sides of motor. Adjust the phase angle on the both sides of the top and bottom to change the movement orbits of the surface screen. It can be equipped with screen cloth cleaning device to avoid clogging effectively. The vertical and horizontal movement of the machine, the track of materials on the screen can be controlled by adjusting the angle of the two eccentric weights. Feature 1. Greater accuracy-Full material flow on all mesh screens providing accurate grading and separation. 2. Lower noise-The quality springs between machine base and vibrating body slow down the noise to less than 60 decibels 3.Easy of operation and lower maintenance-The design of the vibrator housing on these separators allow for standard motors to be used rather than vibratory type, keeping less maintenance costs. 4. Reduces cleaning downtime – The unit disassembles quickly and easily without the need for tools. All contact parts are fully washable 5. Highly polished inner and outer surfaces of the barrel, no dead comer, easy to discharge materials, easy to clear, no cross contamination. Confining to the requirement of GMP. 6. Machine materials : AISISUS304 , AISISUS316L, and other material . 7.The vibration sieve often connect with drying machine, such as vibration fluid bed dryer, fluid bed dryer and so on. 8. The vibration sieve also connect with grinding machine such 30B grinding machine to make the big size materials into small pieces. 9. High efficiency, refined design, duration, any powders and mucilage are suitable for using.