Wind speed indicator WM44-P V3 series

3-digitpanel-mount4-20 mA

Anemometer display with alarms. WM44-P V3 RF has a 3-digit wind speed reading in km/h, mph or m/s. It is configured to work with ANEMO4403 V3 RF + RF MODULE V3. More than one display can work with a Radio-Frenquency set. Several devices can communicate each other in the same area with no risk of interaction or interference. Wind speed display with 2 alarms Only for use with ANEMO4403 V3 RF + RF MODULE V3 Adjustable pre-alarm and alarm RF Communication, according to 802.15.4 standard, 2.4 GHz (worldwide free) 4-20mA analogue output Alarms The alarm is triggered when the wind speed value reaches or exceeds the programmed value. It includes a configurable delay to prevent the alarm from being triggered by gusts of winds. The alarm is deactivated when the wind speed drops below the set value. It also has a configurable delay to prevent the alarm from being deactivated by temporary periods of low-intensity wind. The activation of ALARM2 deactivates ALARM1. When ALARM2 is activated, the reading will blink to warn about the danger. Alarms configuration: Activation values, polarity, intermittent or continuous alarm, alarm latching (only ALARM2) Alarms outputs: Relays. Contacts “NO” and “NC” (ALARM1), contact “NO” (ALARM2). Dry relay contacts. Wind speed sensors & Communication For exclusive use with the Anemo 4403 RF / BAT wireless sensor. Twin units share the same DL and MY parameters but exchanged. DL and MY parameters are written in the unit label. The sensor and the WM44-P V3 RF communicate each other through RF 802.15.4 2.4 GHz, that is a worldwide free frequency band.