Cup anemometer ANEMO5H25 V3 + SAG-105EC V3

IP55EMCwith alarm

Anemometric alarm for tower cranes. Sound and light alarm. Designed in accordance withITC MIE-AEM-2 from the elevation and maintenanceapparatus regulations regarding tower cranes inconstruction works and other applications. Possibilityof performance under guidelines of CPA Tower Crane Interest Group for tower cranes operating in the UK. Power supply 24 Vdc Analog output 4-20 mA RS485 output (Optional) Works with an external wind sensor Possibility of work with wind sensor heated The device performs under the ITC-MIE-AEM-2 guidelines intermitent pre-alarm activation at 50 km/h (31 mph) and continuous alarm activation at 70 km/h (43.5 mph). Possibility of performance under guidelines of CPA Tower Crane Interest Group for tower cranes operating in the UK. Intermitent prealarm at 40 km/h and continuous alarm activation at 61 km/h. The pre-alarm intermittently activates the yellow beacon light and the siren. It is activated when the wind speed is between the chosen values, normally 50 km/h - 70 km/h. The continuous alarm activates the red beacon light and the siren when the wind speed exceeds the maximum value (normally 70 km/h). The alarm latching can be configured so that it can only be deactivated by cutting off the power supply. The anemometric sensor must be fixed on a vertical position. It is power supplied by the SAG-105EC V3. Possibility of connect a heated sensor ANEMO5H25 V3 PULSES OUTPUT. Clamps fixation Zinc plated steel clamps that can be fixed to irregular parts measuring up to 63 x 45 mm. Magnets fixation Fixation magnets for flat ferromagnetic surfaces. The magnet fixation system can support up to 90 kg