Plaster sprayer Koine 3.1

Continuous cycle spraying and mixing pump. Suitable for the application of all the premixed products contained in bags, with a particular aptitude for the application of structural mortars, dehumidifying materials and products for smoothing thermal insulation panels. Standard Equipment D5-2.5 Monoflex Stator and Rotor (purple) Direct connection for material hose DN 35 F Material delivery pressure gauge Control panel with IMER A1 inverter 6 selectable speeds in Dry Mode Pumping speed progressive adjustment in Wet Mode Interactive display with alphanumeric codes IM250 diaphragm compressor on board (Koine 3.1) Fini VKM 402 piston compressor on board (Koine 3.1 Coat) Calpeda NGX2 self-priming stainless steel electropump Water system with flow meter and antifreeze discharge 20 m electric cable with 16 A plug 20 m water hose Ø 19 mm 16 m air hose Ø 13 mm 15 m material hose Ø 25 mm DN 25 gun for premixed with deflectors (Koine 3.1) Gun for smoothing with deflectors + DN 25 gun (Koine 3.1 Coat) Accessory box complete with washing accessories Applications Suitable for the application of: Dry premixed materials (Dry mode) Mortars for gluing and smoothing thermal insulation panels Mortars for concrete / lime based structural reinforcement Restoring / dehumidifying mortars for masonry walls Binders / mortars for consolidation injections Lime / cement / gypsum based plasters Lime / cement / gypsum based smoothers Insulating plasters based on polystyrene or cork Cement / anhydride based self-levelling screeds Fireproofing mortars Wet materials (Wet mode)