Holding electromagnet GTP Series

permanent magnet

Permanent electro magnet Electro magnet with a holding force, maintained without the continuous application of current. Specifi cations Distance Z Magnet - counter-plate [mm] 0 0.05 0.1 0.2 0.3 0.4 0.5 Holding force (currentless) [N] 70 41 24 11 6 4 3 Neutralization power 3.6W Duty cycle (cycle time 30s) 10% Remanence [N] ~ 7 0 Neutralization Positive pole of the supply connected to the positive pole of the coil (red) Preferred rated voltage 24VDC (max. 50VDC) Class of insulation B (130°C) DIN VDE 0580 Test voltage EN 60664-1 Surge category III Degree of protection IP20 (IEC 60529) Electrical termination Lead wires (300mm), AWG26 Surface treatment Solenoid housing nitrocarburized Total weight of solenoid 0.041kg Notes 1) Permanent electro magnet manufactured and tested according to DIN VDE 0580 2) Permanent-holding-force indicated measured at 20°C ambient temperature 3) Permanent-holding-force values for reference only and can differ ±15% as a result of natural dispertion 4) Permanent-holding-forces are valid with fl at sitting grinded counter plate out of steel S235 (EN 10025) 5) Special designs are available 6) All specifi cations subject to change without notice 7) Compliant with RoHS 8) Our „Technical Explanations“ provide information about the use of Permanent electro magnets as well as to general installation and safety instruction