Glue feeding unit ADS1 DynaFill™

The ADS1 DynaFill™ automatically replenishes adhesive to the desired level in hot melt equipment. A low level indicator sends a signal to the DynaFill™ that adhesive is needed. The DynaFill™ then activates a positive pressure suction that draws the adhesive and deposits it into the hot melt unit. The ADS1 will easily integrate with competitive equipment configurations. Out of the box installation with drop-in adhesive tank connection. Overview The ADS1 DynaFill™ automatically replenishes adhesive to the desired level in hot melt equipment. A low level indicator sends a signal to the DynaFill™ that adhesive is needed. The DynaFill™ then activates a positive pressure suction that draws the adhesive and deposits it into the hot melt unit. Automatic "On-Demand" filling of the hot melt unit Removes an operator from the hot melt supply unit area Nozzle plugging and system contamination is virtually eliminated Less thermal shock to the hot melt system Hot melt adhesive supply units (ASUs) require frequent adhesive re-filling. If the operator does not refill the hot melt supply unit often enough, there can be insufficient time to melt and condition the adhesive. this results in equipment down time and employees waiting untill the hopper temperature returns to setpoint. Installation of a HF Hopper feeder system reduces all of the above problems. The result is lower repair costs and higher production rates.