High-voltage power supply NHCG series

AC/DCswitchingrack-mount

The primary switched high voltage power supply of the type series CAPTEC, GLOWTEC; VAPTEC and WELTEC could be work in parallel mode to increase the output power. In parallel mode the output power could be increased up to 120kW. Output voltages from 2kV till max. 150kV are available and 15kV, 20kV, 25kV, 30kV till 40kW. To increase the power the 10kW-modules will operate in parallel mode and will be installed in 19“-switch cabinets completely wired. By the use of the application specific 10kW modules of the type series CAPTEC, GLOWTEC or VAPTEC in parallel operation there are high power high voltage power supplies available which are suitable for your special application. The devices come with a digital regulation as well as a RS232-Interface. With this RS232-Interface the set points for the output values could be given and read out. Further more the device could be enabled / disabled, failure messages could be read out and advanced arc management setting could be done. The RS232-Interface could be work in two operation methods, the terminal-mode and the SPS-mode. At the terminal-mode characters could be interpreted on the control side with a terminal program, e.g. as the hyper terminal from windows. At the terminal program you could see a operation interface with which you could give settings to the power supply and also get information from the power supply.