Water filter

sandpressurefor water treatment

10T/H Mechanical Multi Media Industrial Sand Filter For Water Treatment Outline This product is applied to the filtered water turbidity is generally less than 5 mg / l to meet the industrial and mining enterprises and towns of the industrial water or water of life of the drinking water quality standards for water treatment equipment . Suspended solids in industrial wastewater solids removal . Bonding colloid particles, the water contains suspended solids condensed flakes can not be removed by the precipitation method can be loaded filter layer of the water through a pressure filter , so that the water of transparency . This product is divided into two kinds of water to choose : Note the shortening of the operation cycle reduction in filtration rate , single-layer media filter is applied to water turbidity often about 100 mg / l , the end of the coagulation and sedimentation of raw water (for example, often use the raw water turbidity higher ) , such a filter in the use of feed should be in front of Note adding coagulant . Dual-media filter water turbidity is generally below 15 mg / l , the maximum is not greater than 20 mg / l of precipitation water . Main technical conditions and instructions Working pressure : 5kgf/cm2 Inlet water temperature : 20℃ Speed ​​: 10m / h Turbidity : water < 20mg / L , water < 5mg / L, ¢ 2400 to be equipped with compressed air, to help red recoil . Mechanical filter, removing iron and manganese removal filters , according to user requirements with a multi-channel valve