Electronic rotational speed monitor EGS 2

Electronic speed monitor for overspeed / underspeed and standstill Up to 4 programmable switches Options: additional incremental output, isolated ball bearings Description The electronic overspeed switches of the EGS 2 series are ideally suited for applications where only one switching output (overspeed / underspeed) is required. Alternatively, the switching output can also be used as a standstill monitor. The required switching point is preset ex works. Parameterization is not required. The overspeed switches monitor the set speed with high switching accuracy – even at low speeds – and are also suitable for high switching frequencies. Reliable The electronic overspeed switches of the EGS 2 series offer a long service life and high availability. High shock and vibration resistance Robust, thick-walled housing Torque bracket with ball joints Large bearings with high dynamic load rating Option: hollow shaft design with insulated hybrid bearings Safe The electronic overspeed switches of the EGS 2 series ensure reliable speed monitoring even under severe ambient conditions. Electrically insulated semi-conductor switches Status monitoring of switching contacts Slip detection (standstill / crawling movement) Flexible The electronic overspeed switches of the EGS 2 series have a preset switching output and are suitable for different applications. Suitable for special environments (e. g. saliferous) Variety of shaft diameters Preset ex-works (switching speed) Option: additional incremental output Precise The electronic overspeed switches of the EGS 2 series work without speed increasing gears and offer high switching accuracy. Wear-free electronic switching contacts