Sealing press HTP

pneumaticframefixed

Including four shape sealing tools upper/lower (curve length 526mm) and six shape sealing tools upper/lower (curve length 363mm) Upper and lower tool carrier water cooled Including water recooler IKV07 Six temperature controllers RES 407, SPS controlled, switchable to four or six uses. Electrical cabinet mounted to the right hand side of the frame. Sealing press is activated by two mushroom buttons (two-hand actuation). Four uses 4x upper shape sealing tools, impulse heated, actuation by pneumatic cylinder Outside contour 155x108mm according to customer sample, sealing seam width 9mm. Two tools connected in series with one temperature control attached. 4x lower shape sealing tools, fixed on counter pressure plate. Two tools connected in series with one temperature control attached. Temperature setting can be adjusted in upper and lower sealing tool individually. Six uses 6x upper shape sealing tools , impulse heated, actuation by pneumatic cylinder Outside contour 162x38mm according to customer sample, sealing seam width 9mm. Two tools connected in series with one temperature control attached. 6x lower shape sealing tools, fixed on counter pressure plate. As with four uses, two tools are connected in series with one temperature control attached. Temperature setting can be adjusted in upper and lower sealing tool individually. Technical data: Cycle output: 3 cycles/ minute Transformer output: 6x 2,5 KVA designed for two tools connected in series Heating: Two-sided impulse heating, temperature controlled Display: LCD Temperature setting: digital Technical data • Fuse : 25 A, slow-blow • Connected Voltage : 400 V • Actuation : 2-hand control • Bag length : 1300 mm x 600 mm