Welding anti-spatter product FOTIA ALEA 2.K

The welding fluid is located in an aluminium sachet, thus three times as productive than conventional spray cans. Characteristics: Non-flammable compressed air is used as propellant. Active welding substance is contained in an aluminum bag, thus three times more efficient than conventional spray cans. The propellant used is non-flammable compressed air. Spray the workpiece surface thin and evenly from 30 - 40 cm distance. For arc welding with electrodes, easy removal of the slag, even with V-seams. Easy cleaning of welding seams. Also prevents the welding spatter from burning in the burner heads during inert gas welding and contact welding. When used correctly no complications with further processing of priming, painting, galvanizing etc. It is completely non-flammable and can therefore be applied without risk in the workplace. Product is exempted from the specific labelling requirements of hazardous products according to ordinance on hazardous substances. VOC free. Spray can contains no hazardous solvents. No release of CFC / CFC or flammable propane / butane. Advantages of the 2-chamber spray can: Very high proportion of active ingredients, 3 more economical than conventional spray cans. Spray can can be used in any position, even in overhead operation. Emptying the spray can up to 99% and it is cost saving. PRODUCT INFORMATIONS Protective film for: Workpiece Silicone no VOC no MATERIALS Cast iron Optimal Steel Optimal MODES OF APPLICATION Spray yes Dip no