Pneumatic punching machine SDS1000P-NM

PNEUMATIC PUNCHING MACHINE 1 ML, 6 HOLES Ø 3,2MM, BASE AND PEDAL INCLUDED Pneumatic punching machine for workshop, reference SDS1000P-NM, useful working length 1m, 1,2mm steel capacity, 25mm minimum center distance. On-line punching of 6 x 3.2mm diameter. Holes in one movement, base and control pedal, depth gauges, side gauges and adjustable heads The pneumatic workshop punching machine SDS1000P-NM is a “must-have” to the insulation workshops for in-line punching of pipe and fish tail before rolling. This stable and rigid machine is equipped with a pneumatic system with foot pedal control which will facilitate and optimise the serial punching work. Its punches position and depth gauges adjustments will allow optimal positioning of the part to be punched. An adjustable side gauge on each side of the machine will allow fish tail’s punching. Punching machine also available in working length 1270mm Other punch diameters: please contact us Punching of 6 holes Ø 3.2mm in line in a single movement Pneumatic system Model equipped with a pedal control that facilitates the operator's work Higher punching capacities than the SDS1000 model Very good rigidity and stability of the machine Speed of up/down movement: 1.5'' at full capacity Side gauge for fish tail’s punching Positioning of the punches on a graduated ruler Graduation for the depth gauge of the punches (max.45mm) Punching chips collection bin