Forklift truck ramp

platformhydraulic pistonsteel

This st 52 is boiled with steel sheet and gives the steep ramp 2 times more cardboard than it should be. In addition, the slope given to the St 52 and st 37 sheet in the section pressing the Dorse gives ease of loading. In the construction of steep ramps, tear-drop pattern sheet is our preference. Because we minimize loading accidents that may occur during installation in bad weather conditions. With the hose blasting valves in the Pistons used in steep ramps, sudden hose bursts that may occur in cases that are not calculated and subsequent platform drop are prevented. The electric control panel we use on steep loading ramps is cardless and is simple enough to be easily intervened by your electrician in case of any emergency. The removal process is performed with the single button on the electrical control panel. This button with lighting warning must be continuously working during installation. During loading, if the electric panel warning light of the upright loading ramp is dim and the loading is in progress, each load passing over the ramp will apply force to the piston. Steel construction pulls the load on steep loading ramps. If the load does not come to the upright ramp electrical panel due to power cut or problems that may occur on the power line, as mentioned, the warning lamp is installed in a fireproof condition, the piston seals are torn due to excessive load. to prevent this, attention should be paid to the electric button with the lighting warning on the electric panel of the steep loading ramp.