video corpo

Two-arm roller extractor-stripper 15

two-arm roller extractor-stripper
two-arm roller extractor-stripper
two-arm roller extractor-stripper
two-arm roller extractor-stripper
two-arm roller extractor-stripper
Add to favorites
Compare this product
 

Characteristics

Number of arms
two-arm

Description

The Series 15 separators are used together with the Series 18 pullers for removing ball bearings, roller bearings, inner rings and other flat parts in trade, industry and workshops when there is not enough space for pulling hooks. The separating and extracting process is able to gently separate these parts before they can be extracted from the outside. Area of application Together with the Series 18 pullers for pulling ball bearings, roller bearings, inner rings and other flat parts in trade, industry and workshops. Benefits The sharp cutting edges enable stripping where other stripping methods cannot be used The screw connection between the separating and extracting device ensures maximum stability during extraction If the separating jaws are screwed into the extractor the other way round, the contact surface is enlarged and extracted more gently Operation Press the sharp cutting edges of the cutting device behind the part Clamp the separating jaws onto the side bolts of the separating device using the pressure spindle by tightening the adjusting nuts evenly and ensuring that the separating blades are positioned under the part to be removed as far as they will go Screw the pull bolt of the puller into the threaded holes of the separator as far as it will go Hold the separator firmly and pull off the relevant part safely and carefully by tightening the clamping nut
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.