Tripod turnstile LBAT PMR

Structure: Galvanised sheet steel, RAL 9010 polyester paint. Rotor: Ø 40mm galvanised steel arms on bearings on their lower section. Gate: Ø 40mm galvanised steel gate arms on bearings on their lower section. Casing: Detachable front allowing for the installation of access control readers, intercoms... Roof: Aluminium rain gutters. Paint: Structure in galvanised steel with RAL 9010 paint. Rotor in steel with RAL 9010 paint. Casing in galvanised steel with RAL 9010 paint. Roof in laminated aluminium with RAL 9010 paint. Drive system: Controls integrated into the upper casing. Manual drive device, two-way locking through the use of electromagnetic ratchets. Single-phase 230V-50Hz power supply. Logic control through a programmable 24V PLC. Two-way unlocking signal: dry contact (no power). In the event of a power failure, the rotor will move freely in both directions of travel. On request: two-way locking or one-way locking with free passage in the other direction (to be specified in the order). Two-way locking signal: dry contact (no power). Returns to position with the help of the integrated door closer. In the event of a power failure, the gate will move freely in both directions of travel. On request: two-way locking or one-way locking with free passage in the other direction (to be specified in the order). Gate drive system: Controls integrated into the upper casing. Manual drive device, two-way locking through the use of electromagnetic ratchets. Single-phase 230V-50Hz power supply. Logic control using a programmable 24V PLC.