10/100/1000T (w/ PoE af/at) to 100/1000M SFP Industrial Switch Converter; 12V/48V/AC input
IEEE802.3at PoE/PSE Feature (PoE model)
Support auto-sensing LLF by DIP Switch / 10K bytes Jumbo Frames
Dual speed SFP cage (100/1000MFX) set by DIP Switch
Dual DC input power: 12V model (9.5~56VDC) ; 48V model(44~56VDC) , supports dual ±48VDC input (PoE model)
Wide dual input DC range 9~54VDC w/Galvanic isolation (non-PoE DC model)
Wide dual input AC range 18V~36VAC w/Galvanic isolation (non-PoE AC model)
Ethernet Copper Port can work as PD mode (non-PoE-PD model)
AREMA** part 11.5.1 compliance
Operating Temperature Range from -40°C to 75°C(-E model)
Remote enable/disable PoE feeding power through fiber (PoE model)
OVERVIEW
The Lantech I(P)GC-0101DSFP is an Industrial Converter converging from 10/100/1000BaseT to 100/1000M-FX dual speed (with 802.3at/af PoE support). It supports 10K jumbo frame.
Auto-sensing LLF and Power Fault LED setting by DIP switch
Featured with LLF (Link Loss Forwarding) function, Lantech I(P)GC-0101DSFP is able to auto cut off connection if one end of connection is down. When copper port disconnects, it will auto turn off fiber port. When fiber port disconnects, it will auto turn off copper port. Smart LLF function alert central side switch immediate remedy action when connection is lost. Power Fault LED can be off by DIP switch.
Remote enable/disable PoE feeding power through fiber (PoE model)
The PoE power transmission of IPGC-0101DSFP can react to the fiber connection status. The control center can simply cut off and then re-connect the fiber connection to re-boot the PoE device, such as a camera that is connected to IPGC-0101DSFP remotely.