Laboratory autoclave RSA

automaticsterilization

The RSA Autoclaves have been designed to sterilise – by means of clean saturated steam – heat-resistant and moisture-stable materials, such as metal parts, plastic or rubber components, liquids in ventilated (open) or sealed (hermetically) containers, filter cartridges and clothing, etc. Predefined and “custom” programmes for every need. The equipment process is developed by our Automation Department, according to the current regulations/standards and the type of product being sterilised. Sterilisation chamber pressure or vacuum tests; Bowie & Dick tests; Helix tests; automatic filter breaker test with integrity tests; solid component and porous load programme; programme for liquids in ventilated containers; programme for liquids in sealed containers; programme for liquids in syringes; sensitive/fragile product (e.g. filter cartridges) programme; rubber cap programme; decontamination cycle with chamber condensate sterilisation and drain filtration, in compliance with BSL3 and BSL4, etc. The steam is injected into the sterilisation chamber via a PID-controlled automatic modulating valve and the generated condensate is continuously evacuated through the drain, in order to ensure excellent heat distribution during all the sterilisation phases (temperature deviation below ± 0.4°C). • Circular, quadrangular or rectangular sterilisation chamber with quadrangular or rectangular hatches (doors). • An ashlar-type cavity completely envelopes the chamber to quickly and uniformly heat/cool the loads. • Fully welded one-piece chamber with rounded corners to ensure excellent hygiene levels and facilitate internal surface cleaning.