Electro-pneumatic hot foil stamping machine H-PLC-1528

for large print areaswith automatic feederfor leather

Product name:Hot Stamping Machine For Beverage Crate Model Number: H-PLC-1528 Description: Hot Stamping Machine For Beverage Crate Parameters: 1.Adjusting of worktable in transverse direction：50mm 2.Adjusting of machine-head in longitudinal direction ：200mm 3.Pressure selection range：0.6- 0.8Mpa 4.Power supply: 220V 50HZ 5.Power of main motor: 25W 6.Electric heating power：3KW 7.Heating panel size：150x280mm 8.Worktable size: 420x500mm 9.Equipment size: 900x900x1600mm Operational procedure： This machine is a kind of heating equipment and it must be connected to power supply with reliable protective earthing. 1. Connect the air pipe of air compressor to oil-water separator of the equipment, then raise the pressure adjustment knob and rotate it, “+” for pressure charging, “_ “for pressure reduction. 2. Install the mould tooling and place the work piece properly. Loose the locked handle behind the pillar and turn the handwheel on the pillar. Adjust the distance between the printing head and the work piece and then lock the handle. (If necessary, slightly adjust the screw over the cylinder) 3. Switch on the circuit breaker and set hot stamping temperature (Note: The temperature showed on temperature control gauge is only for reference). 4. Foil selection and loading a、 Select proper foil according to character of the gilding elements.