Screw spindle pump L4
for chemicalsfor lubricantsfuel

Screw spindle pump - L4  - Leistritz Pumpen GmbH - for chemicals / for lubricants / fuel
Screw spindle pump - L4  - Leistritz Pumpen GmbH - for chemicals / for lubricants / fuel
Add to favorites
Compare this product
 

Characteristics

Technology
screw spindle
Fluid
for chemicals, for lubricants, fuel
Operation
electric
Priming
self-priming
Mobility
stationary
Domain
industrial, for the chemical industry, for the petrochemical industry
Applications
transfer, circulation, chemical process, injection, unloading, loading, for tube and pipe cleaning
Fluid specification
for abrasive fluids, for low-viscosity fluids, for high-viscosity fluids, for fluids with lubricating properties
Protection level
chemical-resistant
Other characteristics
horizontal mount, low-noise, high-flow
Flow

Max.: 5,000 m³/h
(176,573.33361 ft³/h)

Min.: 0 m³/h
(0 ft³/h)

Pressure

Max.: 150 bar
(2,175.566 psi)

Min.: 0 bar
(0 psi)

Fluid temperature

Max.: 350 °C
(662 °F)

Min.: 0 °C
(32 °F)

Description

Leistritz Screw Pumps , Series L4 are self-priming rotary positive displacement pumps for pressure ranges of 16 bar (232 psi), 40 bar (580 psi) and 150 bar (2175 psi) suitable for the transport of lubricating and non-lubricating, low and high viscous liquids with abrasive particles. Applications: ↗ Oil & Gas ↗ Tank Storage ↗ Chemical and Petrochemical Industry ↗ Power Generation and Fuel Oil Systems ↗ Shipbuilding Design and Operation: Selfpriming Screw Pump with two screws in double volute and hydraulically balanced design. The drive torque is transmitted from the double helix drive screw to the likewise double helix idler screw via herringbone gears.The screws rotate closely meshing but without contact in the spindle bore of the interchangeable pump casing insert. As a result of the special profile geometry sealed cavities are formed which transport the pumped liquid continuously with low shear and without turbulences from both suction chambers axially to the discharge chamber.For optimum strength and low shaft deflection both drive screw and idler screw are manufactured from single piece bar stock.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.