Testing unit GEL 211 B

General information  Testing any sensors with sin/cos output 1 VPP, e.g. MiniCODER  Transmitting the data via WLAN to mobile terminals (tablet, PC etc.)  Display of the data in a web browser, independent of the operating system  Used for checking the signals for compliance with adjustable tolerance limits - sin/cos signals (amplitude, offset, phase offset) - Reference signal (amplitude, offset, position and width) - Target wheel (damage, concentricity, quality of the teeth)  Defining and saving different tolerance limits  MiniCODER plus: Used for setting the parameters - Automatic calibration of the sin/cos signals - Configuring/reading the operating hours counter - Saving the 7 configured speed ranges for the operating hours counter in one record Possible to save several records in the GEL 211 Features  Compact device suitable for mobile use  Data display on terminals with web support Advantages  Eases assembly: Due to the fast evaluation of the measured signals, the interactive correction of the signals and the graphic evaluation, the analysis of the signals is extremely straightforward.  Optimises maintenance and service work: Diagnostics and parameter configuration on the MiniCODER plus are undertaken in the installed state, e.g. without opening the spindle. This aspect is particularly convenient and efficient.  Increases the reliability: The measured values from the analysis and the spindle histogram are documented automatically by the generation of the report, which can be printed out and saved. Field of application  Servicing and commissioning machine tools  Servicing and commissioning HSC spindles  Servicing and commissioning motors