Waste removal system Phasep

The LNS tramp oil removal system removes waste oil from machine coolant. Furthermore, this creates a healthier work environment, reduces absenteeism and health issues. Equally important, coolant costs are reduced. PhaSep uses a unique floating pick-up that skims the tramp oil and coolant mix from the top of the machine sump. Without delay, liquid moves through the coalescing material and oil droplets as small as 20 microns are separated from the coolant. The oil droplets rise to the top of the tramp oil removal system. When the oil layer builds up sufficiently in the unit, it passes over a specially-designed weir, and is trapped away from the clean coolant. The oil can then be removed periodically through the waste oil drain. Lastly, coolant, cleaned of 99% of contaminated oil, is returned directly to the machine sump. Minimal Maintenance PhaSep requires little maintenance. Cleaning takes only minutes with the removable filter media. A simple clamp is removed without tools freeing the media from the housing. After a quick rinse and re-installation, the PhaSep tramp oil removal system operates continuously with little or no attention required.. Unique Design The tri-ball float captures oil where it accumulates most, at the surface of the coolant. A simple weir dam arrangement captures the oil and sends it to a holding tank for disposal. Clean coolant is gravity fed back to the machine sump. Increase Tool Life PhaSep’s patented oil removal technology will improve metal working fluid life by at least 100%, reducing the need for new coolant. Coolant disposal cost is eliminated and tool life is increased by up to 25%.