Manual punching tool SL5

Snap Lock Punch Snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel used as a finishing course at top of wall or below window. Tabs lock into utility trim.* Punch raises a high projection to compensate for natural relaxation of vinyl plastic. It also works well on aluminum siding but is not recommended for steel. The SL5 should not be used when PERMATABS are required to snap into finished trim. For this application we reccomend using the Malco SL1R or SL2R Snap Lock Punch. PERMATABS is a trademark of C & H Enterprises. Not recommended for use below 32° F (0° C). FEATURES Red Vinyl Grip. Economical and rugged. Punch raises a high projection to compensate for natural relaxation of vinyl plastic. Can also be used on aluminum/not recommended for steel. For securing vinyl skirting and siding to finishing trim. The SL8R produces wider, more secure locking tab projections. Tabs grip a greater surface area and guard against dislodging due to relaxation of vinyl from heat. SL8R installations also resist blowout during times of high pressure and wind. Constructed of steel stampings and rugged investment cast alloy steel jaws, with nickel plate and black oxide finishes. Ergonomic Redline Handles with unique one-hand operation latch offer maximum compound leverage performance and natural fit and feel. Not Recommended for use below 32° F (0° C). The NHP1R punches a generous 5/32 x 3/4 in. (4.0 to 19.1 mm) horizontal slot for adding or elongating nail holes in vinyl and .019 in. (0.48 mm) aluminum siding to accommodate irregular stud spacing.