Digital I/O module

analogRS485Modbus

The Modbus I/O modules allow digital and analogue input values to be connected using the Modbus communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total bus length of 1,200m per segment with speeds of up to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical specifications* Analog input module - AI24 MODBUS (RS485) Operating mode: Slave Temperature sensor 16 channels PT1000, 8 channels 0-10V Power supply 12-24V DC / AC Power consumption: 1.5W Integral 120 Ohm termination resistor 1 x serial port RS-485 Plug-in screw connectors, max. 2.5 mm² Power LED, green, RxD LED yellow TxD LED, red Digital input module DI24 MODBUS (RS485) Operating mode: Slave 24 channels digital input Status LED per channel Power supply 12-24V DC / AC Power consumption: 4.5W Integral 120 Ohm termination resistor 1 x serial port RS-485 Plug-in screw connectors, max. 2.5 mm² Power LED, green, RxD LED yellow TxD LED, red