CT-SET V 2D galvo scanner set
Galvo motor kit for 2D laser beam deflection in the X and Y direction with maximum precision and speed.
Ideally suited to any kind of precise and rapid laser beam deflection thanks to its very high scan speed. The galvos are already fitted with dielectric flat mirrors and the driver electronics are calibrated to the galvos. The drivers provide a full-fledged floating earth symmetrical input as well as feedback pickup options for ScanFail systems. The maximum beam size must amount to no higher than approx. 4mm. Larger mirrors up to a beam diameter (aperture) of approx. 5mm are optionally available.
When developing the CT-SET, particular value was placed on excellent repeatability, combined with very fast step response.
SCOPE OF SUPPLY
package includes:
• 2x Galvos 6210HB
• 1x Mounting block
• 2x MicroAmp III PID driver board, preadjusted
• 2x Galvo cables 30cm, double shielded
• 2x mirror 5x11mm, mounted
• 2x driver connecting cable, 25cm
Max beam diameter : 3.5mm (up to 6mm optional)
Mirror Coating : Dielectric
Wavelength range : 400-700nm
Front surface flatness : L1
Motor positioning linearity : > 99%
Repeatability : 15urad
Resolution : < 40urad
Max scan angle : +/- 20 deg mechanical, +/- 40 deg optical
Input scaling : Adjustable at driver
Operating temperature for motors : 0 - 40° C
Bandwidth driver : DC to 1.8kHz (depending on scan angle)
Small angle step response : <110uS, typ. 100uS
Input signal range : up to +/-10V, adjustable, 0V = middle position
Power supply : +/-18V to +/-30V, 1A per voltage
Operating temperature for driver : -10° - +50°
Driver size (including bracket) : 63 x 50 x 35mm