Spool hydraulic directional control valve 06466 series

Single Modulating Valve Available feedback for electronic pedal angle control capability When used with a properly sized accumulator and accumulator charging valve, the single modulating valves can provide normal and emergency power-off braking in a variety of open center, closed center and load sensing hydraulic systems. Compact design is customizable to applications requirements Spool design provides smooth modulation at specified pressures Optional designs with built-in switches, and potentiometers Eliminates the need for a separate power brake unit or separate hydraulic fluid system Tandem Modulating Valve Superior Brake Performance Operates similar to the single modulating valves, except two independent pressure outputs are provided. If either half of a dual brake system fails, the other half will continue to provide braking function. Eliminates the need for separate power brake unit or separate hydraulic fluid system Available as valve only, push-rod actuated, lever actuated and pedal actuated Optional designs with built-in switches, and potentiometers Reverse Modulating Valve Robust pedal design for demanding environment Reverse modulating valves are used in negative brake systems for controlled actuation of spring apply/hydraulic release service brake. As the pedal is applied, pressure to the brake is reduced causing the brake to engage. Precise control of modulated output pressure Can be actuated by pull mechanism, or pedal Optional lock lever available on pedal designs to hold at full release pressure