Automatic sample preparation system FlowPrep 060

for the laboratory

FlowPrep 060 lets you choose the temperature, gas, and flow rate best suited for your sample material and application. The FlowPrep™ 060 applies both heat and a stream of inert gas to the sample. The heat causes contaminants to desorb from the surface and the stream of inert gas sweeps them out of the sample tube. It lets you choose the temperature, gas, and flow rate best suited for your sample material and application. Needle valves allow you to introduce the flowing gas slowly to prevent fluidization of samples. Specifications Sample Tubes: Up to 3.0-cm (1.18-in.) OD Heating Block: Temperature: 10 ºC above ambient to 400 ºC Temperature Accuracy: ± 10 ºC Electrical Voltage: 100, 120, 220, 240 VAC ± 10% Power: 250 VA maximum Frequency: 50/60 Hz Environment Temperature: 10 to 35 ºC operating; 0 to50 ºC non-operating Humidity: 45 to 80% relative, non-condensing Gases Used: Helium, nitrogen, argon, or any other pure gas that does not adsorb at room temperature Flow Rate: Up to 50 cm3/min. No vacuum required Sample Capacity: 6 heating stations and 6 cooling stations Physical Height: 45 cm (16.93 in.) Width: 36 cm (14.17 in.) Depth: 30 cm (11.81 in.) Weight: 8.6 kg (19 lbs)