Metal stripper MS-111

MS-111 will readily soften and strip most organic systems, such as epoxies and polyurethanes. It will not attack any metal surfaces or valuable parts during the time necessary to remove polymers. Caution: It may darken stainless steel and aluminum. Benefits Include: 100% Nonflammable Softens and Strips Most Organic Systems Applied Via Brush Technique MS-111 Epoxy stripping agent will readily soften and strip most organic systems, such as epoxies and polyurethanes. It will not attack any metal surfaces or valuable parts during the time necessary to remove polymers. Utilization of a powerful and effective solvent blend enables rapid soften and facilitate removal with stripping tools. For highly adhered material, soak in MS-111 until a metal tool can penetrate the coating. Caution: It may darken stainless steel and aluminum if exposed to MS-111 for extended periods of time. DIRECTIONS FOR USE: Vent containers carefully to equalize pressure and pour material carefully at room temperature to avoid splashing and boiling. Coatings: MS-111 Epoxy Stripping Agent may be applied with a brush containing only non-plastic bristles and handle. When film has lifted, either scrape or rinse with alcohol. A second application will occasionally prove necessary. Castings: Place object to be stripped in tank, cover with liquid, and allow to stand until plastic has disintegrated or loosened. This will vary from minutes to days depending on casting thickness. Remove with a hook or basket. Flush with clean alcohol. STORAGE: MS-111 should be stored at or below room temperature in a glass or polyethylene container, which should be covered tightly to retard evaporation.