Polyester adhesive tape 106

non-wovenindustrial

106 is suited for structural and secondary bonding applications where flame retardant properties are required. Recommended for bonding substrates including, but not limited to, Nomex & aluminum honeycombs, metals, cured & uncured epoxy composites, balsa, and foams. Variants • 106-8: Increased tack 106 is supplied in standard film weights from 0.030 to 0.090 psf (150-450 gsm), either unsupported or on a variety of commercially available reinforcements, including: • Non-woven polyester carrier (HC) • Nylon mesh (N), and tricot (TR) • Unsupported (U) • Metal meshes for electrical management • Also available in fabric (NB1106) and unitape (NCT106-8) forms Benefits/features • Flame retardant • Co-curable with most 250°F (121°C) curing prepregs • FAR 25.853 Appendix F, Part I, (a)(1)(i) flammability requirements • MMM-A-132B, Type I, Class 3, Group 3 • MIL-A-25463B, Type I, Class 1, Group 3 • NASA outgassing requirements for space applications Recommended processing conditions 106 can be cured at temperatures from 235°F (113°C) to 300°F (149°C), depending on part size and complexity. Low, medium, and high pressure molding techniques may be used for curing. Recommended cure cycle is 25psi (172kPa), 3°F (1.7°C)/min, ramp to 250°F (135°C), hold for 60 minutes, cool to <140°F (60°C).