Electric forklift truck FB16R/20R/25R/30R/35R
ride-on

Electric forklift truck - FB16R/20R/25R/30R/35R - NINGBO RUYI JOINT STOCK CO., LTD - ride-on
Electric forklift truck - FB16R/20R/25R/30R/35R - NINGBO RUYI JOINT STOCK CO., LTD - ride-on
Add to favorites
Compare this product

Characteristics

Motor type
electric
Operator
ride-on
Carrying capacity

1,600 kg, 2,000 kg, 2,500 kg, 3,000 kg, 3,500 kg
(3,527.4 lb, 4,409.2 lb, 5,511.6 lb, 6,613.9 lb, 7,716.2 lb)

Lifting height

Max.: 6,500 mm
(255.91 in)

Min.: 3,000 mm
(118.11 in)

Overall width

1,130 mm, 1,200 mm, 1,302 mm
(44.5 in, 47.2 in, 51.3 in)

Overall length

3,000 mm, 3,270 mm, 3,350 mm, 3,620 mm
(118.1 in, 128.7 in, 131.9 in, 142.5 in)

Load center distance

500 mm
(19.7 in)

Axle loading with maximum load front

Max.: 2,300 kg
(5,070.6 lb)

Min.: 1,400 kg
(3,086.5 lb)

Axle loading with maximum load rear

Max.: 2,900 kg
(6,393.4 lb)

Min.: 1,700 kg
(3,747.9 lb)

Axle loading without load front

Max.: 7,870 kg
(17,350.4 lb)

Min.: 3,870 kg
(8,531.9 lb)

Axle loading without load rear

Max.: 830 kg
(1,829.8 lb)

Min.: 730 kg
(1,609.4 lb)

Height of mast when lowered

2,015 mm, 2,050 mm, 2,100 mm
(79.3 in, 80.7 in, 82.7 in)

Overall height with mast raised

4,050 mm, 4,067 mm, 4,100 mm, 4,200 mm
(159.4 in, 160.1 in, 161.4 in, 165.4 in)

Height to top of overhead guard

2,100 mm, 2,160 mm
(82.7 in, 85 in)

Seat height

1,040 mm, 1,070 mm
(40.9 in, 42.1 in)

Length to fork face

2,080 mm, 2,200 mm, 2,280 mm, 2,470 mm, 2,540 mm
(81.9 in, 86.6 in, 89.8 in, 97.2 in, 100 in)

Fork carriage width

1,088 mm, 1,100 mm, 1,150 mm, 1,160 mm
(42.8 in, 43.3 in, 45.3 in, 45.7 in)

Ground clearance under mast with load

105 mm, 110 mm, 115 mm
(4.1 in, 4.3 in, 4.5 in)

Ground clearance at center of wheelbase with load

110 mm, 115 mm, 120 mm
(4.3 in, 4.5 in, 4.7 in)

Turning circle radius

1,980 mm, 2,080 mm, 2,180 mm, 2,280 mm, 2,340 mm
(78 in, 81.9 in, 85.8 in, 89.8 in, 92.1 in)

Travel speed

12 km/h, 13 km/h
(7.5 mph, 8.1 mph)

Lifting speed

Max.: 0.35 m/s
(1.148 ft/s)

Min.: 0.2 m/s
(0.656 ft/s)

Lowering speed

0.36 m/s, 0.4 m/s, 0.42 m/s
(1.181 ft/s, 1.312 ft/s, 1.378 ft/s)

Gradeability

13 %, 14 %, 15 %, 20 %

Rated output

7 kW, 8 kW, 11 kW, 14 kW
(9.5 hp, 10.9 hp, 15 hp, 19 hp)

Noise level

68 dB

Description

SAFETY AND STABILITY : • Improved efficiency most popular H type driving axle, optimized structure layout and improvedefficiency. • High power and large torque AC driving motor, large diameter body to export larger torque, heat radiating groove reserved for better heat texchange in case of extra-long-time use. • Multifunctional display with using time, fault code, battery status, forklift running information. • AC driving motor without brush, free of maintenance; low electric current, silent driving. • Low gravity center thanks to relocated battery, greatly reinforcing steering stability. • Steering circuit preference, to ensure safety in every turn when steering and lifting in the same time, and to save energy. • Dual-controller design, one driving controller, the other controll steering and lifting. • Metal housing for better protection. • Full LED light. SERVICE ABILITY: • Easy maintained controller and steering potentiometer. • Brushless lifting and driving motor, reduced cost of ownership; external encoder, easy to replace and service. • Over discharge protecting system: while the battery discharges less than 20%, the instrument warming light will turn on. • Braking oil cup installed on the instrument panel, convenient to check and add braking oil. ERGONOMICS: • Optimized structure creates a large and comfortable operating room. • Adjustable steering wheel column, the driver can adjust the position according to his need. • Integrated light switch and steering wheel. • Clear and wide view mast with good visibility. • Intelligent mast collapse buffering. OPTIONAL: • Side-way battery box • Electromagnetic valve • Shock-absorbing chair, with power disconnect function

VIDEO

Catalogs

No catalogs are available for this product.

See all of NINGBO RUYI JOINT STOCK CO., LTD‘s catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

LogiMAT 2025
LogiMAT 2025

11-13 Mar 2025 Stuttgart (Germany) Hall 9 - Stand 9D72

  • More information
    Schraubtec Hannover 2025
    Schraubtec Hannover 2025

    19-19 Mar 2025 Hannover (Germany)

  • More information
    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.