Pipe forming machine

metalhydraulic

Principle of operation 1. The flattening machine is driven by hydraulic pressure, mainly consists of workbench, platting mold, positive flatting device, side flatting device and electrical control device. 2. The procedure is as follows: Put the folded single piece into flatting mold, make the pipe end close to gauge plate, press the start button, start to positive and side flat hydro-cylinder simultaneously, when finish this action, reset all the actions, take out the completed pipe Function 1. one step forming by positive and side platting 2. This machine is driven by hydraulic pressure 3. The low voltage apparatus of the electrical control system is brand of Schneider Quality requirements 1. The platting size is about 6±0.2mm, the two flatted sides should be symmetrical with the center of pipe 2. The flatted parts and common parts should have slope to transit. 3. After flatting, the outer size of the pipe’s R place should be 30±0.2mm Technical parameters 1. Power rating: 1.5KW 2. Input current source: 380V/50Hz 3. Floor space: 1M*0.5M 4. Working frequency: 4-6sec/once 5. Operating staff: one person