Activated carbon adsorber SORBEO

Sorbeo type adsorbents are highly porous materials suitable for use in many adsorption applications. Adsorbents are available in several pack sizes. For detail specification please refer to technical datasheet of specific adsorbent. Characteristics Adsorbent SORBEO Molecular sieve 3-10 is a highly porous, crystalline aluminosilicate in beaded form. The pore openings in the crystals have a diameter of approximately 3 - 10 Å. Adsorbents has been specially designated for drying of most gases. Adsorbent SORBEO Activated Alumina is a smooth sphere of activated alumina. It is a desiccant for drying a wide variety of liquids and gases. Although all molecules are adsorbed to some extent on activated alumina, those molecules having the highest polarity are preferentially absorbed. SORBEO Activated Alumina can be used as adsorbent in adsorption dryers, acid removal originating from lubricating oils and refrigerants, process stream purification/removal of highly polar compounds. SORBEO SGW Silica Gel is a water resistant adsorbent. It is a wide pore, beaded form of silica gel. It is a buffer adsorbent used to protect adsorbent beds. SGW silica gel exhibits a high water capacity under conditions of high relative humidity and in particular when water is present in the liquid phase. It also has a high capacity for liquid hydrocarbons and other organic liquids. It is used as a buffer layer in molecular sieve and silica gel beds which may be subject to occasional liquid carryover. Descriptions of other adsorbents are in technical data below. Applications • Adsorption dryers