Wireless electric energy meter Telik Trafo

elik Trafo is a device that directly measures the low voltage output of distribution transformers and sends the collected data to monitoring systems. It is intended for energy balance, allowing continuous monitoring and remote monitoring of consumption data. The data obtained from Telik Trafo monitoring allows electricity distribution system operators to make more agile decisions and carry out a series of analyses. It has the MQTT protocol for publishing data in addition to the Wi-Fi module for configuration and communication with industrial networks. This product communicates with the mobile network via LTE NB-IoT and LTE Cat-M1 frequencies. Telik Trafo is a compact device with native wireless communication, which makes it easy to install and deploy in the field. - Input channels 3 voltage input channels referenced to neutral Range: 85 Vac to 285 Vac (phase-neutral) | 0 Vac to 493 Vac (phase-to-phase) 3 current input channels (indirect measurement using the Rogowski Coil) Range: 2 A to 1,000 A Insulation category of Cat-III/600 Vac measurement sensors - Resolution Voltage channels: 0.01 Volts Current channels: 0.01 Amps - Nominal frequency 50 Hz/60 Hz - Measured and calculated variables Direct Voltage 3Ø (V) Indirect Current 3Ø (A) Frequency (Hz) Power: Active 3Ø (kW) | Reactive 3Ø (kVAr) | Apparent 3Ø (kVA) Power factor 3Ø and total Energy: Total direct and reverse active (kWh) | Total direct and reverse capacitive reactive (kVAh) | Total direct and reverse inductive reactive (kVAh) - Internal measurements Internal temperature