Scissors post lift Fox 50 VX

5 tonelectro-hydraulicfor car

Fox 50 VX L=5260 mm Electro-hydraulic scissor lift with capacity 5.000 kg (11000 lbs) The lift is already according the updating of August 2010 of the european norm EN 1493 Versions: N - standard runway (not equipped)- CA - front recess for turn plates and/or play detectors CT - total convergence front recess + rear slip plates LT - version with lift-table for wheel free working I - flush Mount version Description -The CT/LT version offers the maiximum versatility for the alignment service and any other use -The access ramps/wheel stops hinged on the platforms eliminate obstacles on the floor when the lift is raised up. -The levelling system is provided by master cylinders integrated into the hydraulic unit. -The regulating bolts on the base (12) are double to allow regulation between the floor and the base, and between the base and the Platform (with lift closed). -The front recess is 50 mm/1,9 inch deep -The rear slip plate is 2270 mm/89,4 inch long and is built in the Platform. This is steel made and moves upon plastic rolls. Furthermore, thanks to its generous dimensioning it has +-3° angle of rotation. -LT (Lift Table) 3.500 kg (7710 lbs) The lift is already according the updating of August 2010 of the european Norm EN 1493 Safety Devices: -Parahute valves on the lift and LT -Automatically-activated mechanical safety locks -Photocells for Platform synchronization control -Limit switch with acoustic warning for the complete lowering -Low voltage control circuit (24V) -"Dead -man " Controls