Module features
◆The module supports 8-channel digital output, the output voltage is 0VDC and the output low level is valid.
◆The module could drive field equipment (relay, solenoid valve, etc.).
◆The module internal bus and field output are isolated by optocoupler.
◆The module carries with 8 digital output channel LED indicator.
◆The module has the functions of thermal shutdown and short-circuit protection.
General Parameters
Power Consumption - Max.64mA@5.0VDC
Isolation - I/O to internal bus: opto-couple isolation (3KVrms)
Field Power - Nominal:24VDC, Range:20.4-28.8VDC
Wiring - Max.: AWG 18
Min.: AWG 24
Installation - 35mm DIN-Rail
Size - 115*14*75mm
Weight - 65g
Vibration Resistance - Comply with IEC 61131-2 and EC 60068-2-6
Impact resistance - Comply with IEC 61131-2 and IEC 60068-2-27
EMC Performance - Comply with IEC 61131-2 and IEC 61000-4
Environment Specification
Operating Temperature of Horizontal Installation - -35℃~70℃
Operating Temperature of Vertical Installation - -35℃~60℃
Relative Humidity - < 95%RH (No Condensation)
Storage Temperature - -40℃~85℃
Storage Humidity - < 95%RH (No Condensation)
Manufacturing Test Temperature - -40℃~75℃
Ingress Protection Rating - IP20
Output Parameters
Channel Number - 8 Channels
LED Indicator - 8 channels output LED indicator
Rated Current - Single channel output:Max. 1000mA
The total output of the module: Max.4A/8 Channels
Leak Current - Max. value:3uA
Output Impedance - < 200mΩ
Output Delay - OFF to ON:Max.50us
ON to OFF:Max.300us
Protection Function - Over temperature shutdown: typical 135℃
Overcurrent protection: typical value 3A
Short-circuit protection: Supported
Load type - General use and Resistive, Pilot Duty