Assembly paste 270

multipurposewith PTFEfor chuck jaws

OKS 270 is a grease paste for long-term lubrication of sliding surfaces subjected to high pressure Areas of application Lubrication of dirt-sensitive sliding points in mechanisms Assembly lubrication with large lubricant reservoir, e.g. chucks in which a supplemental relubrication at longer intervals with grease guns is possible Advantages and benefits Excellently suited for dirt-free assembly and long-term lubrication Highly effective due to optimum solid lubricant combination Broad range of uses in area of parts sensitive to soiling Low consumption due to formation of highly effective lubricating films Good corrosion protection behaviour Technical specifications lower operating temperature: -25 °C upper operating temperature: 125 °C (lubrication) press-fit test (μ): 0,14, no chatter four-ball test rig welding load: 5,000 N thread friction coefficient (μ total): 0.09 (screw ISO 4017 M10x55-8.8 black-oxide, nut ISO 4032 M10-10 black-oxide) Applications For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610 or OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants. Industries No matter what industry you come from, we at OKS have the right solution for you.