Incoloy immersion heater ARMTIE series

•Single or 3 phase Immersion heater with thermostat and Incoloy sheath 2¼ BSP brass fitting •IP55 aluminium terminal cover •Options for 240 or 3-phase 415 volt operation •Pressure rating: 150 Psig / 10 Barg. 3 kW to 12 kW immersion heaters include a built-in incoloy pocket with a 20 amp, 5 to 80°C or 30 to 90°C thermostat. See the to-order table below for specific thermostat ranges and lengths supplied with each model. To order with an optional high temperature 45 to 120°C 20 amp thermostat add "-HT" to the part number and check price or order using the part number builder below. The IP55 rated aluminium head is approximately 120 mm diameter and 100 mm high. The brass boss has a 2¼" BSP thread and gasket for fitting in a tank through a suitable boss. An optional brass back nut and gasket is also available for alternative mounting. To get the best service and optimum stratification it is recommended to mount the heater horizontally at the bottom of the tank. Care should be taken to ensure the elements are immersed at all times and are not allowed to run in sludge, to avoid burning out. Please contact our sales department for screw in immersion heaters with 1¼, 1½, 2 or 2½ BSP brass fittings and 2¼ BSP in stainless steel.