ISO 9060 pyranometer CMP3

for solar energy test applicationssecond classvoltage output

ISO 9060 spectrally flat Class C No change of desiccant for 10 years Low cost radiometer for accurate routine measurements Weatherproof cable connector Easy way of leveling the instrument Two CMP3s can form an albedometer 5 year warranty The CMP3 pyranometer is an instrument for measuring the solar irradiance. The thermopile sensor construction measures the solar energy that is received from the total solar spectrum and the whole hemisphere (180 degrees field of view). The output is expressed in Watts per meter square. The CMP3 pyranometer is designed for continuous indoor and outdoor use. The CMP3 pyranometer (ISO 9060 spectrally flat Class C) is intended for shortwave global solar radiation measurements in the spectral range from 300 to 2800 nm. The thermopile detector measures irradiance up to 2000 W/m² with response time <18 seconds and typical sensitivity 10 µV/W/m² that varies less than 5 % from -10 ºC to +40 ºC. Operating temperature range is -40 ºC to +80 ºC and the stability is better than 1 % per year. The CMP3 pyranometer features a snap-on white sun shield, integrated leveling and a weatherproof connector which is supplied pre-wired with 10 m of signal cable for simple installation. An optional mounting rod and longer cable lengths are available. Two CMP 3s can easily be mounted back-to-back to make a low-cost albedometer. The Pyranometer does not require any power, it supplies a low voltage of 0 to 20mV in relation to the amount of incoming radiation. When a higher voltage level or a 4 to 20mA signal is required, the AMPBOX is the perfect solution.