Inverter welding machine YD-600RF2

MAGCO2 lasersemi-automatic

High power welding with a rated output of 600 A and a duty cycle of 100 % Inverter-based meticulous control of welding waveforms Easy-to-set operation panel Robust structure Welding of thick plates A variety of arc characteristics are available as standard. The optimal mode can be selected according to various welding situations. Wires with a diameter of 1.4 mm can also be used, thereby enabling users to increase the welding current and the amount of wire deposition. Maintaining high weldability The combined use of the inverter and waveform control achieves stable arcs and high-quality welding even at a high output current range. High power welding with a rated output of 600 A and a duty cycle of 100 % High power output, ideal for welding medium to thick plates. The fast welding speed achieves a large amount of deposition. Since there is a margin in the output voltage, the arc is stable even when using an extension cable. * In the case of 55 V output, the duty cycle is 80 %. Fine control based on the high-speed IGBT inverter Stable arcs can be obtained over a wide range from low to high currents. In particular, stable welding is possible from an output of 120 A with a 1.4 mm diameter wire. (When welding mild steel using CO2 gas) Switches for frequently used functions are located on the front panel The initial current dial, initial voltage fine adjustment dial, and crater repeat function switch, which are frequently used when welding medium and thick plates, are located on the front panel.