Conical anti-vibration mount VIBMAR
metalsteelsilicone rubber

conical anti-vibration mount
conical anti-vibration mount
conical anti-vibration mount
conical anti-vibration mount
Add to favorites
Compare this product
 

Characteristics

Configuration
conical
Material
metal, steel, rubber, elastomer, silicone rubber
Applications
marine
Other characteristics
low-frequency
Static load

Max.: 1,300 daN

Min.: 10 daN

Diameter

84 mm, 152 mm, 200 mm
(3.307 in, 5.984 in, 7.874 in)

Description

The VIBMAR series has a base plate with two or four mounting holes and a tapped steel core. The elastomer is bonded to the steel. E1N104 and E1N106 versions have a conical spring embedded in the rubber. Environmental protection is provided by painting the metal parts and by coating the elastomer with an ozone resistant compound. Avantages These multi-axis low frequency dampers have been specially designed to protect electrical or electronic racks and marine or road transport generator sets (on board or not). They are cone-shaped to absorb considerable displacement and shocks. Specifications Natural frequency : - axial : 8 to 12 Hz; - radial : 6 to 10 Hz. Maximum permitted excitation at the natural frequency of suspension : ± 1.25 mm. Maximum axial travel available for shocks : 30 mm. Amplification factor at resonance : < 6 and < 4 for silicone rubber versions. Structural strength corresponding to a continuous accelaration of 3 g with maximum load. When suspending an enclosure, the same type of damper should be used as a stabiliser. Operating temperature : - 30°C to + 100°C; - 54°C to + 150°C for silicone rubber versions.

Other PAULSTRA products

ELASTOMERIC ANTI-VIBRATION MOUNTS

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.