Modbus RTU weight transmitter DAT 500

The DAT 500 weight transmitter guarantees high performance and long-term reliability. It is equipped with several optionals: upload and download functions for programming with TESTER 1008, the connection can occur through the external converter and configuration and calibration can be done either from the front panel or from a PC. The weight transmitter DAT 500 has a Peak Hold function for dynamic weighings and screw terminal blocks. Technical Specifications Measuring range: -0.5÷+3..5 mV/V (-3.9÷+3.9 mV/V optional) Input sensitivity: 0.02 µV/count Full scale non-Linearity: < 0.01% Gain drift: 16.000.000 points Trasducer input voltage: 5 V (max 6 load cells 350 Ohm) Visible resolution (in divisions): 60000 Divisions value (adjustable): x1, x2, x5 Decimal figures range: 0 ÷ 3 Temperature range: -10 ÷ +50°C (max umidity 85% without condensation) Storage temperature: -20 ÷ +70 °C Filter: 0.1 ÷ 25 Hz Logic output: 2 Solid-state relays, (maximum load 24 Vdc / 100 mA each) Logic input: 2 optoisolated 24 V c.c. PNP (External voltage) Serial port: RS232C or RS422/RS485 with ASCII or Modbus RTU protocols Power supply: 24 Vcc ±15% - power 5 W Regulatory compliance: EN61326-1, EN55011, EN55014 for EMC; EN61010-1 for electrical security Dimensions and weight: 96 x 48 x 120 mm (L x H x D); 250 g Baud rate: 2400, 9600, 19200, 38400, 115200 adjustable Transmission distance: 15m (RS232C), 1000m (RS422; RS485) Bipolar optional output: ±10V