Water-jet cutting machine MD-X

for metalsheet metalCNC

The MD-X, PHENIX TECHNOLOGIE new water jet cutting machine, has been commercialized since second quarter of 2016. The MD-X water jet cutting center is mainly dedicated to « pure water » applications but can also use the « hydro abrasive » process. It is equipped with 4 servomotors allowing high moving speeds (40 to 50 m/minute) and 1 to 5 cutting heads. Ideal for medium to large series, it combines quality and long lifetime. The 4137 bar high pressure pumps power varies according to the customer’s needs and requirements: 30 Hp, 40 Hp, 50 Hp, 75 Hp, 100 Hp or 150 Hp. The MD-X cutting table is constituted of a rectified welded frame with machined guiding bearings (DUAL GENTRY model – Double axis X or Y). It is equipped with prismatic linear rails INA type and transmission by rack and pinions on X and Y axes with self-adjustment and ball screw on Z axis. It is motorized by 4 “brushless” motors with YASKAWA-OMRON incremental encoder. Its axes are entirely protected by bellows and protective casings against abrasive spraying. Precision reducer – large moving speed Qualitative components and material selection (guiding, ball screws shaft, nuts, sensors, cables, mechanical and electric components, etc.) – CE standards From 1 to 5 heads with manual or motorized spacing Dynamic performances: Maximum speed X and Y: 40 to 50 m/minute Maximum speed Z: 40 to 50 m/minute Maximum cutting speed: 10 m/minute Precision: +/- 0.1mm Repeatability: +/- 0.1mm