Professional hot water pressure cleaner with group pump motor at 1450 rpm, motor at double bearings and pump with three ceramic pistons, connecting rods and camshaft.
The hydraulic circuit has a bypass valve to regulate pressure, the entry of water directly into the pump.
In the electrical panel the controls and the auxiliary circuit are low voltage 24 volt and a thermal overload relay protects the main engine.
The burner has a 220 volt motor independent of the main engine, the coil is a double passage of smoke.
The aspiration of detergent occurs at low pressure through the venturi system.
Shutdown immediate and total at the closure of the gun.
-Equipped with two valves; one for the production of steam and the other for the suction of the detergent in high pressure.
-The hydraulic circuit is protected by a safety valve.
-Red light indicates the absence of fuel and the fl ow level switch stop the flow.
-Delayed total stop, halt after 15 seconds delay after the closure of the gun.
-Incoming water is in the tank through a floater that regulates the flow.